This device in accordance with BS 1363 - 1:1995 + A4:2012 article 9 and figure 2 a and 2 b standards, article 23, IEC 60320-1 GB 17465.1 1 article 23 related standards, used to test the strength of the plug shell.

Scope of application:

Applicable to test the BS plug (the UK, Singapore, Hong Kong, Malaysia, Saudi Arabia's certification such as British plug) and IEC 60320-1 appliance couplers in normal use process, such as the assembly and wiring will not lead to electric parts pierced by excessive stress can reach the outer surface or the creepage distance and clearance under the requirements of the below.

Technical parameters:

1, scope of work: 240 + 0 / - 10 n balance (including weight);

2, pressure hammer: D chamfer at the bottom of the R is 2.0 ~ 2.5, covers an area of 25.0 ~ 25.2 was;

3, hard wood board: match BS1363.1 figure 2 b require hard copy 1 boards;

4, high voltage tester, optional.