Cable Flame Test Chamber| UL94 Vertical horizontal flame chamber| Cable burning tester|UL94-2012Flammability test chamber| PCB Flammability test| VDE plug dimension gauges

UL62-2011电线型号含义,线号,芯线,绝缘护套平均最小厚度,额定温度,电流,电压要求UL 62Cordage Type, Construction,Cype Designation and Rating,Conductor Jacket & Insulation Material and Min. Average Thickness

UL Cordage Type, Construction and Rating/UL62电线型号, 结构和额定要求
Cord Type* 型号	AWG Size Range 线号		No. of Cond. 导体/芯线	Conductor Insulation Material and Min. Average Thickness (inches)导体绝缘材料最小平均厚度(英寸)		Jacket Material and Min. Average Thickness** (inches) 护套材料最小平均厚度(英寸)			Temperature Rating (°C)†额定温度		Voltage Rating 额定电压
									Standard 标准	Other 其它
HPN	18 – 12		2 or 3††	.045 Rubber					90	105	300
HSJ	18 – 12		2, 3, 4	.030 Rubber††		.030 Rubber			90		300
HSJO	18 – 12		2, 3, 4	.030 Rubber▲		.030 Oil-Resistant Rubber			90		300
S	18 – 2		2 or more	.030 Rubber▲		.060 Rubber▲			60	75, 90	600
SE	18 – 2		2 or more	.030 lastomer		.060 lastomer			105		600
SEO	18 – 2		2 or more	.030 lastomer		.060 lastomer			105		600
SJ	18 – 10		2, 3, 4	.030 Rubber◆		.030 Rubber			60	75, 90	300
SJE	18 – 10		2, 3, 4, 5	.030 Elastomer††		.030 Elastomer			105		300
SJEO	18 – 10		2, 3, 4, 5	.030 Elastomer		.030 Elastomer			105		300
SJO	18 – 10		2, 3, 4	.030 Rubber◆		.030 Oil-Resistant Rubber			60	75, 90, 105	300
SJT	18 – 10		2, 3, 4	.030 Plastic◆		.030 Plastic			60	75, 90, 105	300
SJTO	18 – 10		2, 3, 4	.030 Plastic◆		.030 Plastic			60	75, 90, 105	300
SO	18 – 2		2 or more	.030 Rubber▲		.060 Oil-Resistant Rubber▲			60	75, 90	600
SP-1	18		2 or 3††	.030 Rubber					60		300
SP-2	18 – 16		2 or 3††	.045 Rubber					60		300
SP-3	18 – 12		2 or 3††	.060 Rubber▲					60		300
SPT-1	18		2 or 3††	.030 Plastic					60	75, 90, 105	300
SPT-2	18 – 16		2 or 3††	.045 Plastic					60	75, 90, 105	300
SPT-3	18 – 10		2 or 3††	.060 Plastic▲					60	75, 90, 105	300
ST	18 – 2		2 or more	.030 Plastic▲		.060 Plastic▲			60	75, 90, 105	600
STO	18 – 2		2 or more	.030 Plastic▲		.060 Plastic▲			60	75, 90, 105	600
SV	18		2 or 3††	.015 Rubber		.030 Rubber			60	75, 90	300
SVE	18 – 17		2 or 3††	.015 Elastomer		.030 Elastomer			105		300
SVEO	18 – 17		2 or 3††	.015 Elastomer		.030 Elastomer			105		300
SVO	18		2 or 3††	.015 Rubber		.030 Oil-Resistant Rubber			60	75, 90	300
SVT	18 – 17		2 or 3††	.015 Plastic		.030 Plastic			60	75, 90, 105	300
SVTO	18 – 17		2 or 3††	.015 Plastic		.030 Plastic			60	75, 90, 105	300
TPT	27 (Tinsel)		2	.030 Plastic					60		250
TST	27 (Tinsel)		2	.015 Plastic		.030 Rubber			60		125
* Types SVO, SVTO, SJO, SJTO, SO, STO and HSJO have jackets which are also recognized for oil resistance at maximum temperature of 60ºC. Types SJ, SJO, SJT, SJTO, S, SO, ST and STO may also be made for outdoor use and will be indicated by adding a “W” suffix to the cord type. Similarly, types SJ, SJTO, SJO, SJT, S, SO, ST and STO may also be made in water-resistant grades with “Water-Resistant” printed on the jacket. 3-wire SJT may be made in special low-leakage constructions for medical equipment cords. ** Where no jacket is shown, the construction is integral or flat style with insulation also serving as jacket. † For cordage ratings higher than 60ºC, the temperature limit is printed on the outside of the jacket. This does not apply to heater cordage type HPN, rated 90ºC, or 105ºC. †† Recognized in three conductors when third or center conductor (with Green or Green/Yellow stripe) is used for equipment grounding. ▲ Insulation and jacket thickness depend on cordage size. Thickness as shown are for 18 and 16 AWG. ◆ Insulation and jacket thickness depend on cordage size. No. 12 AWG requires .030" conductor insulation thickness and .045" jacket thickness. No. 10 AWG requires .045" conductor insulation thickness and .060" jacket thickness. The term Elastomer refers to thermoplastic elastomer.
Inner Conductor Colors/内导体（绝缘）颜色
Function/功能					North American (NA)北美			International (ICC)/国际
Hot/火线					Black			Brown
Neutral/中线					White			Blue
Ampere Ratings of 3-Conductor Bulk Flexible Cords and Cables/3芯软线及电缆容许额定电流
Table below shows the amperes a cord or cable can carry continuously wthout exceeding its temperature rating and is for two current carrying conductors and one non-current carrying conductor. (Taken from the National Electric Code)
Conduct or Size AWG							Types SE, SEO, SJE, SJEO, SJT, SJTO, ST, STO, SPT-1, SPT-2, SPT-3(AMPS/安倍)
18							10A
16							13A
14							18A
12							25A
10							25A
10							30A
8							40A
6							55A
4							70A
2							95A
UL Cordage Type Designation/UL62电线型号含义
UL Cordage Type		Designation
HPN HSJ HSJO S SE SEO SEOO SJ SJE SJEO SJEOO SJO SJOO SJT SJTO SJTOO SO SOO SP-1 SP-2 SP-3 SPE-1 SPE-2 SPE-3 SPT-1 SPT-2 SPT-3 ST STO STOO SV SVE SVEO SVEOO SVO SVOO SVT SVTO SVTOO TPT TST XT		Heater Parallel Neoprene Heater Service Junior HSJ with Oil-Resistant Jacket Service Service Elastomer SE with Oil-Resistant Jacket SEO with Oil-Resistant Insulation Service Junior Service Junior Elastomer SJE with Oil-Resistant Jacket SJEO with Oil-Resistant Insulation SJ with Oil-Resistant Jacket SJO with Oil-Resistant Insulation Service Junior Thermoplastic SJT with Oil-Resistant Jacket SJTO with Oil-Resistant Insulation Service with Oil-Resistant Jacket SO with Oil-Resistant Insulation Service Parallel — 1/32″ Insulation Service Parallel — 3/64″ Insulation Service Parallel — 1/16″ Insulation Service Parallel Elastomer — 1/32″ Insulation Service Parallel Elastomer — 3/64″ Insulation Service Parallel Elastomer — 1/16″ Insulation Service Parallel Thermoplastic — 1/32″ Insulation Service Parallel Thermoplastic — 3/64″ Insulation Service Parallel Thermoplastic — 1/16″ Insulation Service Thermoplastic ST with Oil-Resistant Jacket STO with Oil-Resistant Insulation Service Vacuum Service Vacuum Elastomer SVE with Oil-Resistant Jacket SVEO with Oil-Resistant Insulation SV with Oil-Resistant Jacket SVO with Oil-Resistant Insulation Service Vacuum Thermoplastic SVT with Oil-Resistant Jacket SVTO with Oil-Resistant Insulation Tinsel Parallel Thermoplastic Tinsel Service Thermoplastic Christmas Tree Thermoplastic
NOTE: Service parallel types—wall thickness for integral construction. Elastomer is a thermoplastic material with elastomeric properties similar to rubber.