Main Technical Data

Describe

This is general version specification, the various types has the slightly different.

Input Power

220VAC+/-10%，50Hz/60Hz, 5A

Input pressure

≤4Kgf/cm²

Master control system

PLC and the man-machine dialogue touch screen microcomputer control

Test the power cord types

Can test with/without polarity plugs and connectors (1 P, 2 P, 1 P + 2 P),

can also defer to the customer request design.

Test Items

Polarity and continuity test, insulation resistance, interpolar HI-pot

and tegument HI-pot, leakage current, relative length (Grounding resistance and so on can be customizable).

Test modes

The pedal switch control or insert the test sample for automatic test.

Test sequence

Polarity, continuity(open and short circuit),

insulation resistance, interpolar HI-pot and tegument HI-pot.

Continuity &

Polarity test

Test principle

1、Inductive test wire length≥10pF

2、Loop modes: polarity click give out sound and light signals instructions, dislocation has audio and light alarm prompt, need to press the reset button to stop.

Test result modes

1、Continuity is NG, indicator can't achieve qualified point, give out sound and light alarm.

2、The other is NG, automatic locking and has sound and light alarm prompt, need to manually reset button.

3、Qualified products and unqualified automatically counting, passed automatic unlocking push out and print qualified marks.

Hi-pot Test

Inside output voltage

0~5KV Continuous adjustable

Inside output Hi-pot

leakage current

According to the modes choose 0.5, 1.0, 2.0, 3.0, 5.0mA

 or 0.5~10 mA continuous adjustable.

Outside output voltage

Continuous adjustable

Outside output Hi-pot

 leakage current

According to the modes choose 0.5, 1.0, 2.0, 3.0, 5.0mA

 or 0.5~10 mA continuous adjustable.

Rated power

600VA

Waveform

50/60Hz，AC sine wave

Voltage calibration

+/-5%

Switch

Zero-level conversion

Test time

Digital display, preset type, inside and outside Hi-pot can be arbitrarily set.

High pressure indicator

Proportion

1:50

Class

1.5  Class

Judgment precision

+/-3% Present setting values

High pressure fail judgment

Judging

Measured value larger than the basic value;

The cut-off output voltage and give out the fail signal.

Leakage current value

According to the modes choose 0.5, 1.0, 2.0, 3.0, 5.0mA

or 0.5 ~ 10 mA continuous adjustable.

Judgment precision

+/-3% Present setting values

Calibration

Pure resistance loading series connection R M S, true value table test.

Insulation resistance

Output voltage

500V DC

Voltage calibration

+/-5%

Reference value setting

5 MΩ/100MΩ，可定制Customizable

Judging

Measured value smaller than the basic value and give out the fail signal.

Judgment precision

+/-5%

Indicator

（0-100 MΩ）+/-5%

Measurement range

0~∞

Insulation testing body

Conductive sponge

Relative length

Wire sensitivity

Inductive test wire length≥10pF

Thimble

Test qualified marks

Has ordinary push out and heats up push out two modes,

 temperature can be set, print a test qualified marks.

Tally function

Automatic counter

Qualified products and unqualified automatically counting.

 Safety protection

Electric shock protection

The earth grounding protection, safeguards the personal safety，

The machine has installed, only need grounding.

Size

Machine size

According to various types

Other

special requirements

1、Can be install unqualified automatic destroying cutting knife.2、 According to demand choose a variety of plug and connector test special socket。3、Other functions can be custom installed.