Using range

The specimens used for abrading rubber, plastic or similar to a certain thickness for other test equipment to test.

Conform to the standard

UL1581 & UL2556 standard requirements:

Grinding wheel for No. 36 (an), speed of 2500 ~ 3500 r/min.

Linear velocity of 15 ~ 25 m/s (3000 ~ 5000 ft. / min.).

The main parameters

1, grinding wheel specifications: 175 x40x32 G260APRI, 36 granule (an);

2, grinding wheel speed: 24.8 m/s;

3, grinding wheel speed: 2800 r/min (2800 r/min);

4, the size of the work: X44mm grinding wheel diameter of 160 mm, center height of 214 mm;

5, work round trip: 20 mm;

6, gripped sample size: greater than 260 mm in length, the width of the largest 36 mm, maximum thickness 8 mm;

7, motor, 220 v / 350 w / 50 hz.