Product introduction

RH - 7090 of solid insteae hardness test device based on IEC 60884-1 / GB / 1293 (India) IS 2099.1 / DS 60884-2 - D1 (Denmark) in section 14.2 and figure 14, VDE 0620-1 in section 14.2, such as standard and figure 12 production. Apply to check whether a solid bolt of electrical accessories have enough mechanical strength, under load conditions prescribed by the deformation of a solid bolt size. Our company test unit operation simple and convenient and truly meet the standard, far more than domestic counterparts products; With handles and sliding table can light 100 n pressure; Contact with light and digital thickness gauge can be real-time in the pressure to obtain the value in applying to make test more convenient and accurate.

Parameter requirements

1. ShiLiGang bar: Φ 4.8 mm pin;

2. Load: 100 N + / - 1% (including Φ 4.8 mm steel press block, etc.);

3. The method of applying: handles and sliding table;

Instructions Φ 4. Contact status of 4.8 mm steel bar and the solid bolt contact case;

5. Digital thickness gauge: 0 ~ 15 mm, the accuracy of 0.01 mm, used to measure the solid size insteae of force application.