CAN/CSA-C22.2 NO. 60320-1-11, UL 60320-1 Ed. 2 (2011), SANS 60320-1 Ed. 3.01 (2008/R2011) Appliance couplers for household and similar general purposes - Part 1: General requirements (Bi-national standard, with UL 60320-1) 家用和类似用途的器具耦合器

CAN/CSA-C22.2 NO. 60320-1-11, UL 60320-1 Ed. 2 (2011), SANS 60320-1 Ed. 3.01 (2008/R2011) Appliance couplers for household and similar general purposes - Part 1: General requirements (Bi-national standard, with UL 60320-1) 家用和类似用途的器具耦合器

Appliances couplers (connector) standards

AS/NZS 60320.1:2012, UL 60320-1 Ed. 2 (2011), DIN EN 60320-1 (2008-05), SANS 60320-1 Ed. 3.01 (2008/R2011)，IEC 60320-1 Ed. 2.1(2007), PN EN 60320-1:2005, UNE EN 60320-1:2003, SN EN 60320-1:2001, NBN EN 60320-1:2001, I.S. EN 60320-1:2001, NF EN 60320-1:2001, NEN EN IEC 60320-1:2007, CEI EN 60320-1:2001, SN EN 60320-1:2001, SS EN 60320-1 Ed. 2 (2001), BS EN 60320-1:2001+A1:2007, KS C IEC 60320-1:2006, CSA C22.2.60320-1:2011, OVE/ONORM EN 60320-1:2010, EN 60320-1 VDE 0625-1:2008, MEK 60884-1-94, GB 17465-2009； 

CAN/CSA-C22.2 NO. 60320-1-11 - Appliance couplers for household and similar general purposes - Part 1: General requirements (Bi-national standard, with UL 60320-1)

Publication Year: 2011

Total Pages: 148

Publisher: CSA

Preface

This is the harmonized CSA and UL standard for Appliance Couplers For Household And Similar General Purposes - Part 1: General Requirements. It is the first edition of CAN/CSA-C22.2 No. 60320-1 and the and the second edition of UL 60320-1. This standard is based on IEC 60320-1, Edition 2.1: 2007 (edition 2: 2001 consolidated with amendment 1: 2007).

Scope

This part of IEC 60320 is applicable to two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, for household and similar general purposes and intended for the connection of a supply cord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply.

NOTE 1 Appliance inlets integrated or incorporated in appliances or other equipment are within the scope of this standard. The dimensional and general requirements of this standard apply to such inlets, but certain tests may not be relevant.

NOTE 2 The requirements for connectors are based on the assumption that the temperature of the pins of the corresponding appliance inlets does not exceed70 °C for connectors for cold conditions; 120 °C for connectors for hot conditions; 155 °C for connectors for very hot conditions.

NOTE 3 Appliance couplers complying with this standard are suitable for use at ambient temperatures not normally exceeding 25 °C, but occasionally reaching 35 °C.

NOTE 4 Appliance couplers complying with the standard sheets in this standard are intended for the connection of equipment having no special protection against moisture. If appliance couplers are used with equipment which may be subject to spillage of liquid in normal use then protection against moisture is to be provided by the equipment.

NOTE 5 Special constructions may be required - in locations where special conditions prevail, for example, as in ships, vehicles and the like; - in hazardous locations, for example, where explosions are liable to occur.

1DV D1 Modify the first paragraph by replacing with the Clauses 1DV.1 and 1DV.2:

1DV.1 These requirements are applicable to two-pole appliance couplers for a.c. only, and with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 20 A, for household and similar general purposes and intended for the connection of a supply cord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply