产品名称：RH-7079球压试验装置IEC 60695-10-2 ed3.0（2014）
产品类别：插头插座检测设备
RH-7079球压试验装置 符合标准 RH-7079球压试验装置设计和制造符合RH-7079球压试验装置符合GB 2099.1 Clause 25.2及图37, GB4706, GB4943, GB17465.1 Clause 24.1.2, IEC 60695-10-2 ed3.0（2014）, 60335-1 Clause 30, 60950-1, 60884-1 Clause 25.2, 60320-1 Clause 24.1.2，60598-1, 61010, 61032, 60439-5, IEC 60601-1, BS 1363-1, -2 Clause 22.2.1, IRAM 2073/4220-1,UL2601-1, CSA 60745, DIN VDE 0620-1 Clause 25.2及图30, IS 1293 Clause 25.2, KS C8305, AS/NZS3109 Clause 24.1.2等标准。适用于对所有绝缘材料制成的电器外壳，外部零件进行耐热试验或用于将载流部件和接地电路的部件，保持在正常位置所必须的绝缘材料部件置于恒温箱或干燥箱中进行的球压试验。 技术参数 球面: 钢球直径为5mm(SR=2.5mm)对样品施加的力: 20 N ± 0.1 N 材质: 不锈钢 底座尺寸: 约H 80 mm xφ50 --- IEC 60695-10-2 ed3.0（2014）Part 10-2: Abnormal heat - Ball pressure test method IEC 60695-10-2:2014-02(en-fr) specifies the ball pressure test as a method for evaluating the softening temperature and accelerated material flow under load of polymeric materials and parts of end products in their ability to resist abnormal heat. It is applicable to the materials used in electrotechnical equipment, subassemblies and components, and to solid electrical insulating materials except ceramics.The Ball Pressure test method is not appropriate for certain elastomers, foamed materials, and other materials that tend to be soft at room temperature. Product Committees are encouraged to evaluate these materials using other methods such as IEC 60695-10-3. This third edition cancels and replaces the second edition of IEC 60695-10-2 published in 2003. It constitutes a technical revision. The main changes with respect to the previous edition are as follows: - The addition of an introduction introduces the user to the basic guidance documents published by TC 89, - Addition of a reference to IEC Guide 104 and ISO/IEC Guide 51 in the Scope, - Additional relevant Terms and Definitions in new Clause 3, - 5.2: Additional requirements to the test specimen support at the suggestion of IECEE-CTL to improve reproducibility, - 5.3: Clarification of heating oven requirements at the suggestion of IECEE-CTL to improve reproducibility, - 5.4: Specification of minimum resolution consistent with method requirements for optical measurement instrument, - New Test Procedure in Clauses 6 and 8 which introduces separate methods for End Product proof testing (Method A) and material performance testing (Method B) and - Updated Clause 11 Test Report to be consistent with other IEC 60695 documents. This standard has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. Key words: Abnormal heat, Ball pressure test method, Fire hazard.
